FT43-IV Flanged Float Ball Steam Trap

Specifications

As a professional high quality Taian FT43-IV Flanged Float Ball steam trap manufacturer,we will offer you the best after-sale service.It is equipped with an automatic air exhaust device, which helps to quickly expel air during startup and improve system efficiency. The large displacement design can effectively handle a large amount of condensate water. The stainless steel working components are highly durable and can operate within a temperature range of 0°C to 220°C. FT43-IV Flanged Float Ball steam trap offers differential pressure options of 4.5 bar, 10 bar and 14 bar. Maintenance can be carried out without interfering with the pipeline.

Structural characteristics and applications

1. This valve can quickly and timely discharge saturated condensed water continuously, ensuring that there is no water accumulation in the heating equipment, thereby achieving the highest heating efficiency.

2. The material of the valve core and seat sealing surface is cobalt chromium tungsten alloy, which is wear-resistant, corrosion-resistant, and durable.

3. The sealing method adopts a semi-circular spherical structure and has been developed with excellent sealing performance.

4. Half circle spherical seal, no concentrated wear during operation, long service life.

5. The float ball drives the lever to automatically adjust the opening of the drainage valve seat hole, which works continuously and is not affected by changes in steam pressure, ensuring stable performance.

6. The X series components can automatically eliminate non condensable cold and hot gases, eliminate gas lock phenomenon, and have good performance in eliminating non condensable gases.

7. The drainage valve seat hole is always below the condensate water level, forming a water seal, and there is no fresh steam leakage during operation.

8. Continuous discharge of condensate water results in stable water flow, which is particularly effective in condensate recovery systems.

Shell material

Ductile iron

Valve body nominal pressure and maximum operating temperature

● Valve body design pressure: PN16
● Ductile iron: ≤ 232℃

Specifications and Connections

● DN32-DN50 flange connection PN16
● *Can customize other flange standards such as ANSI 150/JIS 10K

Maximum working pressure difference of drain valve

16bar g

Displacement diagram

Installation and Maintenance

Installation direction: When installed horizontally, the flow direction for DN25 is from left to right, and for DN40 and DN50, it is from right to left.

Installation position: It should be installed below the steam system outlet, and a 150mm (6-inch) drip leg should be set before the steam trap.

Maintenance: Maintenance can be carried out in the pipeline, but it is necessary to ensure that all connection surfaces are clean.

The FT43-IV Flanged Float Ball Steam Trap is an efficient and reliable steam trap, suitable for various industrial steam systems. Its automatic air exhaust function and high-capacity design make it perform well during startup and operation. Multiple pressure and temperature options enable it to adapt to different working environments.